| Features |
- USB 2.0 to 1 x RS232/422/485
- High-Speed serial ports 921.6kbps
- Driver for Windows, Linux, Mac OS X
- LEDs for Power and TxD/RxD activity
- ESD protection on USB and serial ports
- 2.5kV electrical isolation (ISO version only)
- Small metal housing and Bus powered
- DIN-Rail and wall mountable
- Wide range of operating temperatures
|
 Back to Top |
| Specifications |
| USB Interface |
USB-Input |
USB 2.0 Full Speed, USB 1.1 compliant |
Connector |
USB type B |
Circuits |
FTDI FT231XS |
| Back to Top |
| Serial Interface |
No. of Ports/Type |
1 x RS232/422/485 configured by DIP switch |
Connector |
DB-9 male |
Protection |
16kV ESD surge protection
2.5kV Electrical isolation on ISO version
|
Operating Modes |
RS232
RS422 full duplex (120Ω on/off)
RS485 4 wire, full duplex (120Ω on/off)
RS485 2 wire, half duplex (120Ω on/off)
|
Configuration |
One DIP switch sets the operating mode and RS422/485 termination
No High/Low biasing resistors needed |
Signals non-ISO |
RS232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS422: Tx+/-, Rx+/-, GND
RS485 4-wire: Tx+/-, Rx+/-, GND
RS485 2-wire: Data+/-, GND
|
Signals ISO |
RS232: TxD, RxD, RTS, CTS, GND
RS422: Tx+/-, Rx+/-, GND
RS485 4-wire: Tx+/-, Rx+/-, GND
RS485 2-wire: Data+/-, GND
All signals isolated for 2.5kV |
RS485 Data Direction Control |
ARTc (Automatic Receive Transmit control) |
Data Bits |
7, 8 |
Stop Bits |
1, 2 |
Parity |
None, Even, Odd, Mark, Space |
Flow Control |
RTS/CTS, XON/XOFF |
Baudrate |
RS232: 180bps - 921.6/1000kbps
RS422: up to 3Mbps
RS485: up to 3Mbps
|
LEDs |
bicolour TxD/RxD for each port |
| Back to Top |
| Software |
Drivers |
Windows 2000 to Windows 10 (x86 and x64)
Windows Server 2000 to 2016 (x86 and x64)
Linux (Kernel 3.4 and later built-in)
Mac OS X
|
Installation |
The driver is already installed (Linux), or installs by automatic Download after Device connection (Windows). |
| Back to Top |
| Power Requirement |
Input Voltage |
5V (USB) |
Power Consumption |
max 85mA, 420mW |
Connector |
USB Type B, bus powered, no external supply |
| Back to Top |
| Housing and Mounting |
Case |
0.8mm sheet metal |
Weight |
150g, w/h box 0.3kg |
Dimensions |
50×72×22 mm³ (W×L×H) Case
72×72×22 mm³ (W×L×H) with mounting wings |
Packaged |
85×122×55 mm³ |
Mounting |
DIN-Rail (optional)
Wall mount
|
| Back to Top |
| Environmental Data |
Operating Temp |
−25°C - 75°C |
Storage Temp |
−30°C – 85°C |
Ambient Humidity |
5-95% non condensing |
| Back to Top |
| Standards and Certifications |
Declarations |
CE, FCC |
EMI |
EN 55022 Class B
47 CFR FCC Part 15 Subpart B
|
EMS (EN 55024) |
EN 61000-4-3: Radiated RFI
EN 61000-4-4: Electrical Fast Transient
EN 61000-4-5: Surge
EN 61000-4-6: Induced RFI
EN 61000-4-8: Power Frequency Magnetic Field
EN 61000-4-11: Power supply dips
|
ESD |
EN 61000-4-2 4kV contact 8kV air for
Serial Port
USB
|
| Back to Top |
| MTBF (Mean Time Between Failures) |
MTBF |
available soon |
Standard |
Telcordia (Bellcore) Standard; RelCalc. 5.0 BELL-7 |
| Back to Top |
| Warranty |
Warranty Period |
2 years |
| Back to Top |
| Ordering Information |
655 |
USB-COM Plus Mini (1x RS232/422/485, non-isolated) |
|
USB-COM Plus Mini ISO (1x RS232/422/485, isolated) |
| Back to Top |
| Options |
|
DK 35A DIN-Rail mounting kit |
|
DB9F-to-TB/10 for RS422/485 free wiring option |
|
DB9F-to-RJ45 for changing from DB9 to CAT5 wiring
(Optimised for RS422/485 operating modes) |
|
RJ45-to-DB9M for changing back from CAT5 to DB9 wiring
(Required to match the DB9 pinout at USB-COM Plus Mini) |
|
Serial Null-Modem adapter 9PF-9PF, change male to female |
| Back to Top |
| Packaging |
Packing list |
USB-COM Plus Mini device
USB 2.0 High-Speed cable
4 rubber feet for table mode
|
| Back to Top |
BUY 