Home | VSCOM Info | Partner Login | Contact | Language
VSCOM Home
  Search :



USB-COM Plus mPCIe

mPCIe to 1x RS232/422/485 port (DSub-9 male)

VScom USB-COM Plus mPCIe, a single port Mini PCI Express to-Serial card for RS232/422/485
Features
Specifications
Ordering Information
Drivers & Documentation
Datasheet
Inquiry this product
View Larger Image
  BUY

USB-COM Plus mPCIe provides easy serial port expansion for any system with a full-length Mini PCI Express slot connecting to high speed RS232 or RS422/485 devices. The Mini PCIe card uses USB 2.0 signals as provided on the slot. It is fully ESD and surge protected and bus powered withstanding a wide temperature range to cope with harsh operating conditions.

Flexible Three-Way Serial Ports

The serial port allow different operating modes - easy configured via the front DIP switch - to fully support RS232, RS422 and RS485 protocols. Differential line termination for RS485 (120Ω) is controlled just by choosing the appropriate operating mode. High/Low biasing resistors are not needed, so hassle-free usage is available for the user.
Com Port Drivers are available for Windows, Linux and Mac OS X. A configuration tool allows easy access to special Windows driver options.

High Speed

USB 2.0 full speed connection allows serial data rates of up to 3Mbps for RS422/485 and 921.6kbps for RS232 mode. Every non-standard bitrate (e.g. 500kbps) can be easy set up in the range up to 960 kbps.

Expanding countless computing systems

Mini PCI Express slots are present in various Industrial Computers, modern SBCs, Laptops and more. If there is space for the DSub-9 connector and cabling, this product is applicable as serial port expansion.

Features

  • 1 x RS232/422/485 port
  • Mini PCI Express interface (USB 2.0 )
  • Serial port ESD protected
  • Full length PCI Express Mini card
  • Jumperless, DIP ports configuration
  • Serial speed max. 1000(RS232) / 3000(RS485) kbps
  • Powered by Mini PCI Express slot
  • Wide range operating temperature (-25°C - +75°C)

Back to Top  
Specifications
USB Interface
  USB-Input
USB 2.0 Full Speed, on Mini PCI Express Slot
  Power
Powered by Mini PCI Express slot, max. 120 mA @ 3.3V (400mW)
  Circuits
FTDI FT231XS
Back to Top  
Serial Interface
  No. of Ports/Type
1 x RS232/422/485 configured by DIP switch
  Connector
DB-9 male
  Protection
16kV ESD surge protection
  Operating Modes
RS232
RS422 full duplex              (120Ω on/off)
RS485 4 wire, full duplex    (120Ω on/off)
RS485 2 wire, half duplex   (120Ω on/off)
  Configuration
One DIP switch sets the operating mode and RS422/485 termination
No High/Low biasing resistors needed
  Signals
RS232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS422: Tx+/-, Rx+/-, GND
RS485 4-wire: Tx+/-, Rx+/-, GND
RS485 2-wire: Data+/-, GND
  RS485 Data Direction Control
ARTc (Automatic Receive Transmit control)
  Data Bits
7, 8
  Stop Bits
1, 2
  Parity
None, Even, Odd, Mark, Space
  Flow Control
RTS/CTS, XON/XOFF
  Baudrate
RS232: 180bps - 921.6/1000kbps
RS422: up to 3Mbps
RS485: up to 3Mbps
  LEDs
TxD/RxD for each port
Back to Top  
Software
  Drivers
Windows 2000 to Windows 10 (x86 and x64)
Windows Server 2000 to 2016 (x86 and x64)
Linux (Kernel 3.4 and later built-in)
Mac OS X
  Installation
The driver is already installed (Linux), or installs by automatic Download after Device connection (Windows).
Back to Top  
Power Requirement
  Input Voltage
3.3V (Mini PCI Express)
  Power Consumption
max. 120mA, 400mW
  Connector
Mini PCI Express Slot, bus powered
Back to Top  
Housing and Mounting
  Weight
20 g
  Dimensions
30×51×3 mm³ (W×L×H), Form-Factor long Mini PCI Express
Back to Top  
Environmental Data
  Operating Temp
−25°C - 75°C
  Storage Temp
−30°C – 85°C
  Ambient Humidity
5-95% non condensing
Back to Top  
Standards and Certifications
  Declarations
CE, FCC
  EMI
EN 55022 Class B
47 CFR FCC Part 15 Subpart B
  EMS (EN 55024)
EN 61000-4-3: Radiated RFI
EN 61000-4-4: Electrical Fast Transient
EN 61000-4-5: Surge
EN 61000-4-6: Induced RFI
EN 61000-4-8: Power Frequency Magnetic Field
EN 61000-4-11: Power supply dips
  ESD
EN 61000-4-2 4kV contact 8kV air for Serial Port
Back to Top  
MTBF (Mean Time Between Failures)
  MTBF
available soon
  Standard
Telcordia (Bellcore) Standard; RelCalc. 5.0 BELL-7
Back to Top  
Warranty
  Warranty Period
2 years
Back to Top  
Ordering Information
  600
USB-COM Plus mPCIe
Back to Top  
Options
  6064
DB9F-to-TB/10 for RS422/485 free wiring option
  6061
DB9F-to-RJ45 for changing from DB9 to CAT5 wiring
(Optimised for RS422/485 operating modes)
  6062
RJ45-to-DB9M for changing back from CAT5 to DB9 wiring
(Required to match the DB9 pinout at USB-COM Plus mPCIe)
  661
Serial Null-Modem adapter 9PF-9PF, change male to female
Back to Top  
Packaging
  Packing list
USB-COM Plus mPCIe card
Connection cable to Adapter
DB9 Adapter
Back to Top  
You can purchase VSCOM's products easily from a wide variety of leading technology distributors or partners. Please call us or contact us by mail to find the best ordering method for your needs.
 
  * Specifications are subject to change without notice.
  * All the trademarks and brands are property of their rightful owners.

About VSCOM | Impressum | Contact Us | Term & Conditions | Privacy Policy© 1993-2024 VS Vision Systems GmbH. All rights reserved.