Products >> Network to Serial >> Serial Device Server
|
|
|
|
4x RS232 for LAN |
 |
|
 |
|
|
|
|
NetCom 411 is an industrial-strength network-based serial device server for connecting four RS232 device like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP.
In addition to allowing serial devices to get networked, any host (PC Server or Workstation) without network access can also access remote serial device via adding NetCom devices to the existing serial port. NetCom 411 can be configured over Driver Panels, WEB Browser, serial Port, Telnet, SNMP and serves as a transparent serial channel without platform and distance limitation. The power consumption of NetCom 411 is very low, supply via Ethernet is available. Read background information and check an adapter.
Keywords: Serial to Ethernet converter, RS232, Device Server, Serial Port Server, RS232 zu Ethernet LAN Adapter, TCP/IP, Com Port Redirector
A Serial Device Server for TCP/IP on Ethernet and Internet, RS232 as Com Ports in Windows. Modbus was tested by users.
|
|
| Features |
- Phased Out, no longer available
- Can control 4x RS232 devices located virtually anywhere (via Ethernet or Internet)
- LAN interface 10BaseT/100BaseTx Ethernet
- Driver automatically finds NetCom devices in the network
- Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
- Automatic mode switching between Driver and Raw Mode
- Support TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS
|
 Back to Top |
| Specifications |
| Hardware |
Processor |
ARM 7 TDMI 50MHz |
I/O controller |
16C550C or compatible |
Memory |
8MB SDRAM, 1 MB Flash |
Connector type |
RJ45 for LAN, DSUB 9 male for serial Port |
| Back to Top |
| Interface |
LAN interface |
Auto-detecting 10BaseT/100BaseTx |
Protocols |
TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS |
Serial interface |
RS232 |
No. of port |
4, Speed up to 921Kbps |
Available Modes |
RS232 full duplex |
Signals |
TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND |
| Back to Top |
| Performance |
Speed |
up to 460Kbps |
Parity |
None, even, odd, space, mark |
Data bits |
5, 6, 7, 8 |
Stop bits |
1, 1.5, 2 |
IRQ |
None |
I/O address |
None |
| Back to Top |
| Operating Modes |
Driver mode |
VScom Driver for Windows NT 4.0, 2000 up to 7, Server 2000 up to 2008 R2, both x86 and x64 Editions.
The Driver creates a virtual Com port, using Vscom NetCom protocol. |
TCP Raw Server |
Raw data transfer over TCP/IP. Accepts multiple incoming connections. |
TCP Raw Client |
Raw data transfer over TCP/IP. Connects to multiple hosts or devices waiting for incoming connections. |
TCP Advanced Settings |
Special settings for user-defined modes |
UDP Mode |
Raw data transfer by UDP. The NetCom is client and server at the same time. With the timeout functionality and a configurable trigger string it can make defined UDP packets of incoming data. |
Null Modem Tunnel |
Connecting two NetCom used as virtual null modem cable. |
IP Modem |
The serial port emulates a standard modem. Operates by AT-commands, and dials to IP-Addresses instead of phone numbers.
Windows "INF"-Driver provided for installation. |
Print Server |
The NetCom accepts print jobs, and spools them to the attached serial printer. Operates as of RFC1197, similar to the line printer daemon in Unix-systems |
| Back to Top |
| Power and Environment |
Power requirements |
9 - 30V DC, 400mA @ 12V |
Power supply Adapter |
12V DC 1A |
Dimension |
167× 99×29 mm³ (W×L×H)
189×102×30 mm³ with DB9 connectors and ears |
Operating Temp |
0°C - 60°C |
Storage Temp |
-20°C - 85°C |
Case |
SECC sheet metal (1mm) |
Weight |
0.5kg |
| Back to Top |
| Special Features |
Installation |
Configuration utility automatically finds NetCom devices in the network |
Operating mode |
Automatic mode switching between Driver and TCP RAW mode.
With TCP Advanced settings it is possible to configure the NetCom for using it in multiple modes, so it decides automatically which mode should be used. |
Configuration |
Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP |
SNMP |
special VScom MIB included |
ART |
no |
DNS |
Domain Name Server support |
Firewall |
Special precautions for Firewall environments |
Firmware |
Firmware update over WEB Browser, Telnet, ComPort |
LEDs |
LEDs for Power, Tx, Rx, LAN Link, LAN Speed |
| Back to Top |
| Security |
Password access |
Every capabilities of configuration use the same password including SNMP V3 |
| Back to Top |
| Ordering Information |
Part Number |
668 |
Product Name |
NetCom 411 |
Packing list |
NetCom 411
Power supply adapter 12V, 1A
Serial Null-Modem adapter
CD-ROM with Driver and configuration software
Printed Quick Installation Guide |
| Back to Top |
| Optional Accessories |
|
DK 35A DIN-Rail mounting adapters |
|
Null-Modem adapter, change male to female |
|
Power over Ethernet Splitter, IEEE 802.3af compliant (15W max.) |
| Back to Top |
|
| |
You can purchase VSCOM's products easily from a wide variety of leading technology distributors or partners.
Please call us or contact us by mail to find the best ordering method for your needs. |
* Specifications are subject to change without notice.
* All the trademarks and brands are property of their rightful owners.
|
|
|
|
|
